Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 07-10-2019, 08:30 PM
Bowhunnter0126 Bowhunnter0126 is offline
Junior Member
 
Join Date: Oct 2017
Location: Crisfield, MD
Posts: 8
Default Replacing Side Mounted Rod Holders

Any suggestions on a manufacturer or DIY product to replace the factory wooden side mounted rod holders on a 23' CC? Any help/ideas appreciated.
Reply With Quote
  #2  
Old 07-11-2019, 08:26 AM
Capt Chuck's Avatar
Capt Chuck Capt Chuck is offline
lollygagger
 
Join Date: Aug 2003
Location: Sailfish Capital, fla
Posts: 2,626
Default

I used the Taco Spring loaded type mounted to the ribs and Perko SS bendable pole hangers mounted on a piece of PVC board & painted forward for gaffs on one side & deck brush on the other. The 3/4" PVC board gets the forward holders out past the liner rib. Zoom in and you can see that the top holders had an additional piece of PCV to allow the 6' gaff to lay over the forward vent chase.
Attached Images
File Type: jpg P4260024.jpg (80.3 KB, 78 views)
File Type: jpg gaff holder.JPG (49.2 KB, 79 views)
__________________
"Life is not a matter of holding good cards, but of playing a poor hand well."
-- Robert Louis Stevenson,

as "Americans" you have the right to ......
"LIFE, LIBERTY and the PURSUIT of a Classic SeaCraft" -- capt chuck
Reply With Quote
  #3  
Old 07-11-2019, 09:11 AM
uncleboo uncleboo is offline
Senior Member
 
Join Date: Sep 2009
Location: Edenton, NC
Posts: 1,245
Default

Gucci!
__________________
1975 SF18/ 2019 DF140
Reply With Quote
  #4  
Old 07-11-2019, 12:05 PM
Bowhunnter0126 Bowhunnter0126 is offline
Junior Member
 
Join Date: Oct 2017
Location: Crisfield, MD
Posts: 8
Default

Thanks for the idea Capt. Looks really clean.
Reply With Quote
  #5  
Old 07-11-2019, 06:02 PM
ricknewman ricknewman is offline
Senior Member
 
Join Date: Jun 2009
Location: Eastern Shore, Va
Posts: 150
Default

Hey Capt. Chuck, where did you find the trim along the bottom edge of your cap? I can't seem to find any?
Reply With Quote
  #6  
Old 07-11-2019, 08:42 PM
Capt Chuck's Avatar
Capt Chuck Capt Chuck is offline
lollygagger
 
Join Date: Aug 2003
Location: Sailfish Capital, fla
Posts: 2,626
Default

Quote:
Originally Posted by ricknewman View Post
Hey Capt. Chuck, where did you find the trim along the bottom edge of your cap? I can't seem to find any?
Barbour Plastics
http://www.barbourcorp.com/rub-rail_rubrail.htmt
It has an 1/8" lip which covers the rough combing edge. Comes Black or white
I stretched it out between 2 trees, sanded and painted with Signature Finish using a 3" roller.
__________________
"Life is not a matter of holding good cards, but of playing a poor hand well."
-- Robert Louis Stevenson,

as "Americans" you have the right to ......
"LIFE, LIBERTY and the PURSUIT of a Classic SeaCraft" -- capt chuck
Reply With Quote
  #7  
Old 07-12-2019, 09:24 AM
ricknewman ricknewman is offline
Senior Member
 
Join Date: Jun 2009
Location: Eastern Shore, Va
Posts: 150
Default trim

Thanks!
Reply With Quote
  #8  
Old 07-12-2019, 10:56 AM
jorgeinmiami's Avatar
jorgeinmiami jorgeinmiami is offline
Senior Member
 
Join Date: May 2005
Location: Miami Fl
Posts: 1,243
Default

This is what I'm thinking about for mine


https://www.seadek.com/coaming-bolster-set.html
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:52 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
All original content 2003-2018 ClassicSeacraft